Raleigh Fence Types
Pool Fence Installation in Raleigh, NC
Code-compliant pool fences in aluminum and vinyl. Self-latching gates, proper picket spacing, and North Carolina pool barrier code expertise.
- Lifetime Transferable Warranty
- Free On-Site Estimates
- Locally Owned & Operated
- Open 24 Hours, 7 Days
- Licensed & Insured
Pool Fence Installation in Raleigh
A pool fence is not optional in North Carolina. State law requires a barrier around residential in-ground pools, and the jurisdictions across the Triangle — Wake County, the City of Raleigh, Durham County, and the towns in between — handle the permitting and inspection that go with it. Getting the barrier wrong means a failed inspection, a delay in opening your pool, and real liability if something goes wrong. We install pool fences for exactly one reason: to get it right the first time.
The requirements break into a few categories. There’s a minimum height for the barrier. There’s a maximum gap between pickets, set narrow enough that a small child cannot pass through, along with rules on rail placement so the fence doesn’t become a ladder. And there’s gate hardware — every gate into the enclosure must close on its own and latch on its own, with the latch placed out of a child’s reach from the outside. Those categories are consistent; the specific figures come from the code edition your jurisdiction has adopted. We confirm the current requirements for your address, build to them, and pull the fence permit where it’s required so you’re not coordinating paperwork between contractors while your pool sits waiting.
For material, most Triangle homeowners with in-ground pools choose aluminum. It handles poolside moisture and chlorine well, never rusts with our SolarShield powder coating, and the open picket design keeps the pool visible from the house — a practical safety feature, not just an aesthetic one. Aluminum comes in 3-rail and 2-rail configurations and carries a lifetime transferable warranty. If you have existing vinyl fencing in the yard and prefer a consistent look, vinyl works too, also with a lifetime warranty.
Posts go into concrete regardless of material. Piedmont red clay takes on water and softens through our wettest stretches, and a pool barrier that leans or shifts two years after install is a problem twice over — once for the look, and once because a barrier that’s out of plumb can fall out of compliance. Concrete setting is standard on every job we do.
We install on Saturdays. If your pool is going in this spring or summer and the schedule is tight, that matters. Call (919) 335-4008 or request a free on-site estimate and we’ll walk your yard, confirm the requirements that apply to your address, and put together a quote that covers everything.
What Sets Our Pool Fence Fencing Apart
-
GA pool code compliant
Picket spacing, height, and gate hardware all meet state and county requirements
-
Self-closing, self-latching gates
Required by code; we install only compliant hardware
-
Aluminum or vinyl
Both materials suitable; aluminum more popular for in-ground pools
-
Permit support
We handle pool fence permits where required
Warranty
Lifetime transferable on aluminum; lifetime on vinyl
Pool Fence Fence Styles
- 54" aluminum 3-rail
- 48" aluminum 2-rail
- Removable mesh (for select use cases)
Required for residential in-ground pools. Specific requirements vary by Triangle municipality, so we build to current code and handle permitting where applicable.
Cities We Install Pool Fence Fencing In
Pool Fence Installation Questions
Does North Carolina require a fence around a residential pool?
Yes. North Carolina requires a barrier around residential in-ground pools. The rules cover a minimum barrier height, the maximum gap between pickets, and gate hardware that closes and latches on its own. Local jurisdictions across the Triangle handle inspection and can add requirements of their own, so we confirm what applies at your specific address before we quote the job.
What kind of gate hardware does pool code require?
Every gate into the pool enclosure has to be self-closing and self-latching, with the latch positioned so a small child cannot reach or operate it from outside the barrier. We install pool-rated hardware on every pool gate and set it to spec — no shortcuts, because this is the item inspectors check first.
What's the difference between aluminum and vinyl for a pool fence?
Aluminum is the more popular choice for in-ground pools. It holds up well around water and chlorine, carries a lifetime transferable warranty, and the open picket design gives you clear sightlines into the pool area from the house. Vinyl works well too, especially if your yard already has vinyl fencing and you want a consistent look.
Do I need a permit for a pool fence in the Triangle?
In most Triangle jurisdictions, yes — the barrier is permitted and inspected alongside the pool itself. We pull the fence permit where it's required and coordinate with your pool contractor so the barrier is in place when the inspector arrives and the schedule doesn't slip.
What picket spacing is required by code?
Pool barrier code sets a maximum gap between pickets, narrow enough that a small child cannot pass through, and it pairs that with a minimum barrier height and rail placement rules that keep the fence from being climbable. The exact figures come from the code edition your jurisdiction has adopted. We verify the current requirements for your address and build the enclosure to meet them.
Get Your Free Pool Fence Fence Quote
Tell us about your project and we’ll reach out to schedule a free, no-pressure estimate. Our line is open 24 hours a day, seven days a week.